Comment by xobs

Copper tape on cardboard.

Cardboard is a fantastic material. You can draw the schematic on, and then run copper tape along the schematic. It's easy to annotate, since you just need to use a pen. It's able to handle much more current than a breadboard, since the copper tape has a lot more metal than thin wires. You can solder directly to it, and with tape (or some other insulating material) you can cross wires without having them short.

You can also work with SMT ICs. Using a pair of scissors, you can make your own pads and solder to them. I connected an SO8 to read off the SPI data using copper tape. I built an amplifier using a spare Novena amplifier IC on cardboard with copper tape. And I have a level shifter done on cardboard with copper tape.

Bunnie has a good article on it here, including an example power regulator that's handling 2A on cardboard: https://www.bunniestudios.com/blog/?p=5259