Comment by zeekaran
2 years ago
Normally, mugs are ceramic and thus the parts that had to touch the shelf in the kiln are unglazed.
Maybe we just need to make pottery in 0G.
2 years ago
Normally, mugs are ceramic and thus the parts that had to touch the shelf in the kiln are unglazed.
Maybe we just need to make pottery in 0G.
Not all tableware is barefooted / dry-footed. You can use a stilt, which is a ceramic with sharp metal (eg Kanthal) pins on which the glazed ceramic is supported. Pieces fired this way have small marks on the bottom like the injection marks some moulded plastic has.
Fully glazed ware is good for wet areas when the ceramic may not be entirely vitrified, as this prevents water from soaking into the ceramic body.
Dry-footed ware that hasn't been high-fired will soak up moisture, eg when washing, and so cause problems - crazing, and getting very hot when used in a microwave oven (which can cause more crazing, but also burn your hand!
Source: am potter.
The foot ring on dry-footed mugs is a useful knife sharpener in a pinch.
Huh, TIL
The bare ceramic on the bottom of the mug is of those things I've always noticed about coffee cups but never really thought about.
Could you just suspend them on a cushion of air like indoor skydiving?
One of the primary motivations behind LK99 and other efforts to create room-temp superconductors is to fashion coffee mugs that harness the Meissner effect to levitate above journal print-outs.
Obtaining the necessary laminar flow in the presence of the handle might be challenging.
How do you "just" suspend a mug on a cushion of air?
Maybe like indoor skydiving?