Comment by 1oooqooq
2 years ago
the author is wrong. what you mention is only true for actual SLC chip+firmware. qlc drivers probably don't even have the hardware to use the entire cell as slc, and they adopt one of N methods to save time/writes/power by underutilizing the resolution of the cell. neither gives you all the benefits, all increases the downsides to improve one upside.
and you can't choose.
Even if they do it in a slapdash way, it's still going to be 0 versus "pretty high" and that's a lot easier than gradients of 16ths. Dropping the endurance to match QLC mode would require intentional effort.
what's missing here: QLC bit is not 4-nery, it's 4 bit per bit. 2^4 = 16, so it's actually 16LC. That's contradictory to the name "quad level cell", yes, for some reason.
Respectfully: to the extent that I can understand what you're trying to say, you don't seem to know what you're talking about. Stop trying so hard to bash the whole industry for making tradeoffs you don't agree with, and put a little more effort into understanding how these things actually work.
we are all here reading a machined translated article from a pt_br warez forum on using the wrong firmware on a ssd controller to talk to the firmware on a "smart" nand flash. to mimic a semblance of control of your own device.
but yeah, I'm the delusional one and the industry is very sane and carrying for the wishes of the consumer. carry on.
See, you're still taking every opportunity to rant about "control", while continuing to get the technical details wrong (this time: the bit about firmware on a smart NAND chip, which is a real thing but not what the article is about). You're not even bothering to make a cogent case for why retail SSDs should expose this low-level control, just repetitively complaining. You could have actually made the conversation more interesting by taking a different approach.
1 reply →