Comment by adrian_b
8 hours ago
Truly wired WiFi is easy with the devices that have threaded SMA connectors for antennas, e.g. the motherboards or the mini-PCs that allow the use of external antennas.
With those you just need coaxial cables of appropriate lengths, also with SMA connectors, for making point-to-point connections.
If you want a network where each device can talk with any other devices, you also need a splitter, also with SMA connectors.
Many WiFi M.2 2230 cards have MMCX coaxial connectors on them, which allow the connection of internal antennas attached somewhere on the case of the laptop or mini-PC.
For these, there are MMCX to SMA adapters, which you can use together with SMA cables.
Some M.2 cards have even smaller U.FL coaxial connectors. For these there are U.FL to SMA adapters.
For devices that do not have any standard antenna connectors, one may need to modify them, to solder some RF connectors, which is hard to do without greatly lowering the quality of the WiFi links, due to additional attenuation and reflections.
I would imagine that the stage lightning microcontroller is running a variant of ESP8266 or something similar where the "antenna" are actually thick traces on a circuit board (https://www.electronicwings.com/storage/PlatformSection/Topi...). This is obviously good enough for regular WiFi, but I would imagine this would complicate an attempt for wired WiFi tenfold.
If you build this and expand this to a blog post with some photos and some demo, you can post it here and I guess it will get a lot of upvotes.