← Back to context

Comment by anonymousiam

2 days ago

What is the path of the wires from the switch onward? Do they go into a digital input of the flight computer, or do they directly feed the fuel control valves?

https://simpleflying.com/boeing-787-technical-features-guide...

" Advanced electric controls

The 787 entered service with an improved fly-by-wire flight control system. Rather than mechanical processes, the systems convert flight deck crew inputs into electrical signals. Still, there were additional advancements with the type."

7 comments

anonymousiam

Reply
rogerrogerr  2 days ago

Can't find a definitive source right now, but everything is implying there are discrete lines - at least one for command signal to the FADECs, and a separate sense line to the DFDAU for packaging up and sending to the EAFR. That lines up with design philosophy on this stuff of sensing control input data as close to the source as you can get.

  • anonymousiam  2 days ago

    Thanks for looking. I worked for Boeing (satellites, not airplanes) for a good part of my career, and I was there when Dennis Muilenburg pushed through his cost saving measures. It was the same culture that created the problems with the 737-MAX. Experienced design engineers were replaced/outsourced and the culture of safety was sacrificed. One example here:

    https://www.cnn.com/2019/04/30/politics/boeing-sensor-737-ma...

    787 (Dreamliner) was pushing hard for weight reduction, and it would not surprise me at all if the switch output fed a digital computer input rather than routing directly to the fuel shutoff valves, but I don't have any direct knowledge of this.