Comment by 8fingerlouie
14 hours ago
"by measuring "36W POE consumption" you are excluding the AC-DC conversion losses from the switch's PSU which further makes the comparison a bit unfair. IOW your POE equipment draws more than 36W at the wall."
I'm aware of that, but the wall measurement is still 96W before the UPS, so it's basically just pushing numbers around the same budget. The switch is the only place i have to measure "poe power consumption", so i quoted that number.
"35W you claim, and I still believe it's closer to 40W"
I have 4 x 8TB WD Red Plus drives in there, quoted by WD to be consuming 3.4W idle, so 4x3.4 = 13.6W, and a couple of Samsung QVO 8TB drives, which idles at ~45mW. Assuming the UNAS pulls 20W by itself, adding the drives lands us at 33.7W, right in the ballpark of my measured 35W.
Part of my "astonishment" was also that i run my entire "infrastructure" for 30W more than OPs NAS idles at (66.7W vs 96W).
And yes, 7W is probably peanuts, but when you're paying €0.35/kWh, it all adds up. I came from a full self hosted setup, proxmox, multiple NAS boxes, etc, and was using ~350W idle, when power spiked in 2022 to €$1.12/kWh (peak pricing, 17-21, with an average price some days of €1/kWh). I initially turned everything off, and with just the Mac mini, router, switch, APs, cameras, various hubs, i was at 67W.
The UNAS has been added since (after power prices stabilized), which took the idle power consumption to 96W. And no, the UNAS is not pulling 29W. I've removed a couple of cameras, replaced a couple of APs, even removed an AP, so it's not direct comparison, other than in terms of total power consumption for price comparison.
No comments yet
Contribute on Hacker News ↗