Comment by lostlogin
13 hours ago
Wax is great for road riding. I ride in Auckland where it’s wet half the time (all the time this summer). I re-wax every 400 or so km. It’s clean running and beautiful compared to the expensive oils I was using, and lasts longer.
Wear appears to be down too. The reduction in grease and dirty chain makes is so nice.
It is much better than the expensive oils, but not as good as old fashioned 3in1. The expensive chain lubes are mostly meant for racing, they give you the least friction by a long shot but don't last and most of them do not take well to reapplying without cleaning, you end up with grinding paste.
Wax holds up quite well against water but does hold grit and tends to deposit it on chainrings, sprockets, and pulleys, and it wears them quicker than 3in1 will. Wax shares the downside of PTFE, you need to clean off the old before applying more or things start wearing fast, which is not an issue for everyone. It is nice and clean.
Here in the winter of northern Minnesota, one good snowy ride with the road salt and sand will strip wax. Not that you would want to use wax in this sort of cold even if the road salt and sand were not an issue, wax gets stiff and brittle in the sorts of cold we get. I am an everyday rider and bike is my mode of transportation for everything, in this climate I need ease of reapplication or I will be replacing chainrings yearly.
This sounds wild, and truely savage on gear.
What sort of temperature are you getting down to? Any special gear needed for you or the bike?
Here it’s never below about 5C and maxes at about 30C. It’s mild. The rain is the only thing that can be a lot. The most was about 250mm in a day, which is exceptional, but sudden, very downpours are common.
We can go from 30C to 5C in a couple minutes with a wind change, the weather here keeps your toes. We always get down into the -20sF with another 20 degrees thrown in by the windchill and can spend weeks at that, 2014/15 we spent 3 months in the -20s. Coldest I have biked in is -47 before the windchill. Windchill is tricky on a bike since you make your own wind, it is considerably colder biking than just standing or walking in such conditions.
Gear has mostly been a move away from cartridge bearings, you are lucky if those will last the winter. Old fashioned cup and cone bearings hold enough grease to get you through most winters without having to repack. For the messy and icy weather I try to ride my fixed gear, does not matter if the brakes freeze up, very simple drive train (single piece crank!) I can just ignore all winter other than oil the chain and its 1/8" chain sucks up a lot more oil than the skinny 10+ speed chains and sheds filth much better as well. 3in1 helps a lot as well, it is pretty good about shedding filth. For the brutal cold, when things are dry and for most errands it is generally my touring bike, its granny gear is nice when the grease starts to thicken in the cold and high rpm pedaling does a good job of keeping you warm but keeping the derailers working well even with friction shifters can be a chore.
Only specialty gear I have is studded BMX pedals, they do a great job of keeping your feet on the pedals and are footwear agnostic. Not the best pedal choice for a fixed gear, they can really shred your shins.
2 replies →