Comment by jcgrillo
20 hours ago
None of the existing smart controls stuff I've found really does it for me. I'm trying to build a hybrid heating system with 4 hydronic zones and 8 minisplits. For my HVAC controls the design is converging to a round mechanical Honeywell thermostat for each hydronic zone with a "smart" thermostat (no cloud) wired in parallel--TBD whether buy vs build. For the minisplits I'm building my own thing that can speak their IR protocol, which will also double as a per-room temperature sensor. It all gets tied together with outdoor temp sensor via HomeAssistant. So if all the "smart" stuff fails, the trusty mechanical guy will keep the house from freezing.
There are halfway decent hybrid controls available for ducted systems but you can't afaik buy anything off the shelf to merge hydronic + minisplits. And as far as I can tell, none of the off-the-shelf smart thermostats has any built in analog backup. I view that as absolutely critical for my use, if the power goes out and I'm not around I need to be 100% certain that when the power comes back on the heat will also.
EDIT: Digging around a little more it seems that Mitsubishi H2i minisplit systems don't speak zwave or zigbee, neither does Haier Arctic. I'm not 100% sure if that's accurate, but I haven't been able to find any documentation in the affirmative or negative. Those are the two heat pump options available locally. I'll be remodeling a small barn into an ADU this summer, that project will be more amenable to a forced air hybrid system, so maybe I'll be able to get away with a Honeywell smart zigbee capable thermostat that can drive it.
An analog fallback is a good idea, to be sure your house doesn't freeze when you're away.
> EDIT: Digging around a little more it seems that Mitsubishi H2i minisplit systems don't speak zwave or zigbee, neither does Haier Arctic
There are no mini-splits in the US that speak anything remotely standard. If you want to go with ducted systems, TRANE and others have smart AC units that use "communicating thermostats". The protocol is based on Envirocom system and it's pretty basic.
Good news is that you can still control them by shorting the wires with a traditional thermostat, so you still can have an analog backup in case the regular digital thermostat fails.
The Honeywell thing I bought on amazon turned out to not be analog after all. It's got an Atmel Atmega something or other in it. It obviously can't connect to the internet through its 24VAC 3 wire interface but it's running software I can't inspect and therefore assume to be completely riddled with bugs. It's going back to be replaced with Whites-Rodgers Emerson unit.