I'm as curious as you to be honest - putting a strain gauge on the pedals for measuring mechanical power has been on my list for quite a while. My own (probably inaccurate) measurements right after the generator says I can get 60-70Wh in an hour, but I can get to 100Wh if I try harder. I have reason to believe my setup underestimates power because my ammeter clamps at 5A and I know I can peak over that on the down stroke of the pedal.
I've seen numbers like 250W mechanical power for an average trained cyclist, so either my setup is rather inefficient, my measurements are off, or I'm going to find out that I'm nowhere near as strong as a real cyclist.
On the other hand, the stationary bike I got originally had a rubber belt, which it would chew excessively and I eventually swapped it for a chain because it kept slipping in spite of tensioning it more, suggesting I'm hitting the thing harder than it was originally designed for (how that translates into power I'm not sure).
> I've seen numbers like 250W mechanical power for an average trained cyclist, so either my setup is rather inefficient, my measurements are off, or I'm going to find out that I'm nowhere near as strong as a real cyclist.
Cyclists' power output is sometimes reported as a 'power curve' - a chart with power on the vertical axis, and duration-of-that-power on the horizontal axis.
For example, a cyclist might be be able to produce 500W for 15 seconds; 350W for 1 minute; 270W for 10 minutes; 200W for 1 hour; and 150W for 5 hours.
I'm as curious as you to be honest - putting a strain gauge on the pedals for measuring mechanical power has been on my list for quite a while. My own (probably inaccurate) measurements right after the generator says I can get 60-70Wh in an hour, but I can get to 100Wh if I try harder. I have reason to believe my setup underestimates power because my ammeter clamps at 5A and I know I can peak over that on the down stroke of the pedal.
I've seen numbers like 250W mechanical power for an average trained cyclist, so either my setup is rather inefficient, my measurements are off, or I'm going to find out that I'm nowhere near as strong as a real cyclist.
On the other hand, the stationary bike I got originally had a rubber belt, which it would chew excessively and I eventually swapped it for a chain because it kept slipping in spite of tensioning it more, suggesting I'm hitting the thing harder than it was originally designed for (how that translates into power I'm not sure).
> I've seen numbers like 250W mechanical power for an average trained cyclist, so either my setup is rather inefficient, my measurements are off, or I'm going to find out that I'm nowhere near as strong as a real cyclist.
Cyclists' power output is sometimes reported as a 'power curve' - a chart with power on the vertical axis, and duration-of-that-power on the horizontal axis.
For example, a cyclist might be be able to produce 500W for 15 seconds; 350W for 1 minute; 270W for 10 minutes; 200W for 1 hour; and 150W for 5 hours.
Oh don’t sell yourself short. It can certainly be both! (:
Thanks for sharing the details.
All in good fun of course, it has to be healthier than watching Youtube just sitting around normally.