Comment by rayiner

> There is only "I received a frame addressed to me and acknowledged it" or "I sent a frame and either did or didn't get an acknowledgement back from the receiver". Receivers do not know why they didn't receive a frame, or, if they received a corrupted frame, why it was corrupted.

That's not correct. WiFi is "listen before talk." Radios listen to the channel, trying to decode preambles from other networks, before transmitting. In that process, they can detect other signals well below the threshold where they'll consider the medium in use (the CCA threshold). If you have an otherwise clean channel, the noise floor might be -95 dBm. Radios typically can decode the preambles 3-4 dB above the noise floor. Conventionally, the WiFi standards set the CCA threshold at -82 dBm. So the radio can "hear" a lot of signals that won't cause it to trigger collision avoidance. More recent standards allow using a CCA threshold as high as -62 dBM under certain circumstances to facilitate spatial reuse: https://arista.my.site.com/AristaCommunity/s/article/Spatial....

Also, what the Wifi standards do is less aggressive than what radios could do. The CCA thresholds are set to facilitate orderly use of the spectrum--they're not physical limits. To receive a transmission, you just need sufficient signal-to-noise ratio. An adjacent network transmission raises the noise floor, but if your radio is close enough to your AP, you might still have sufficient SNR.