Got the X4. Put CrossPoint on it. Works like a charm. The http server accessible over wifi makes transferring books extremely simple. (Shame on the Kindle for locking everything down.) This is proof-of-concept that a microcontroller is more than enough for something like an e-reader.
I have a Kindle and a Kobo. They are sturdy devices. But the X4 is the one that is a genuine e-reader. Would not get it as my one and only e-reader though as you tend to miss the size and backlight of the larger ones.
What would I want from future iterations?
- backlight even if it compromises on battery a bit
I love my X4 as well, and would love a backlight. Crosspoint and its downline forks are great.
the only funny thing about the X4 is reading it in bright sunlight. it will corrupt the image on the screen on page turn unless you shade it? something to do w/ older eInk screens and not having a UV Filter. weird, slightly annoying.
I'm with you on every bit. I love my Kobo Libra 2 and it lives on my nightstand table. It's an excellent reader. The X4 with CrossPoint is an alright reader, but I've been chewing through books on my morning commute because it fits in my jacket pocket and I can have it out on the train without bumping into other people.
It's not the best reader I own, but it's the best reader I have on me at any given moment when I'm not laying in bed.
> It's not the best reader I own, but it's the best reader I have on me at any given moment
This. The form factor is almost the right one for an e-reader. The battery lasts for weeks. It is so open that you could probably write your own firmware for it based on CrossPoint or similar for your own needs.
Needs some iterative development while ruthlessly culling requests for random features.
It was probably a decade ago, but I used to have this extremely cheap e-reader that ran off AA batteries, used a monochrome LCD screen (no lighting) and was based on a microcontroller. If you let the batteries die and waited too long to replace them, you had to reflash the software on it. I think it only handled mobi format, but it might have been epub.
Not being lighted is what has kept me from trying it. If they do add lighting I hope it is a front light and not a back light. Hard to beat a front lit e-ink display for reading. Bonus points for warmth settings.
I have the X4 and the X3 (newer smaller one). I will get whatever the next version is if it has a backlight or more DPI / support for smaller font.
X4 is great - has usb-c charger and with the cover feels like an easy to pocket and bring everywhere reader. Does not fit on the back of an iphone. I assume the magnet layout works with popular android phones though.
X3 is also great, actually fits on the back of the phone with the magsafe - magnet is a _bit_ too weak. It does fall off in my pocket frequently but I haven't lost it yet. Does not have usb-c - has weird little magnetic 4 pin charger.
I will gift my X4 to my brother once I've loaded some more content to it.
the next version will unfortunately be a generic Android reader. This device is good because, by chance, out of a thousand devices, one of them has to be better than all the rest. This product is not good by design or merit, but by chance. Same goes for lots of popular cheap Chinese tech, like the Miyoo Mini+ for example. Better than it has any right to be, and the people making it don't have a clue; every change to such a device can only be for the worse.
I've looked at this device and I wonder how good the layout engine is. Screenshots never show text with any hyphenation going on which makes me wonder if it even supports hyphenation.
One of the images on the Amazon page for the reader has somebody holding one beside their laptop and if you look at the screen, it looks terrible. There are even words jammed together ("would be most suitable forthe job").
I love that it has physical buttons though. My reader is the Kindle Oasis and the buttons are one of my favorite features of the device. The Oasis layout engine and typography are both pretty good and I wonder if the X4 would end up feeling like a big downgrade.
The layout engine is limited. It does flow text quite well, but when I had mine (the screen broke a few months ago) I was working on adding more features to the rendering engine.
It's easy to write a HTML & CSS layout engine to support most of the epub spec, but hard to do it well on such a constrained chip. Even things like nested lists and inline code snippets are a challenge.
That must be why Amazon does a lot of pre-processing on their server. They know what device they are sending to and can tailor the file for that device.
Maybe expecting the X4 to look great is asking too much. It took Amazon years to get it right on Kindle. Hyphenation is a difficult task.
I love my X3. I glued its magnetic folio to the back of my Apple Wallet. It turned out perfectly, for me. Pictures below. I've read The Odyssey and several other shorter books on it and have yet to recharge it.
I got the X4 Reader recently as well. I really worried that it was going to be a gadget I used for a while then just toss into a drawer but it really has been a useful device. I liken it to the phrase "The best camera is the one that's with you.", having this attached to my phone, so I near always have it with me, just means when I have a tiny bit of downtime say waiting for the bus, or waiting for a food order, I just pull it out, read a few pages then carry on my day.
Only challenges I have are, I wish the MagSafe was a little stronger, it does come off when I put my phone in my pocket which, 9 times out of 10, means I just have 2 separate devices in my pocket.
I've been using it for about 6 months. Very, very good - especially paired with anna's archive.
IT IS VERY FRAGILE! The eink screen on my first broke while in my backpack. The company is generous, I bought a new one and they gave 35% off and included all accessories (reading light, case, extra protectors). Highly recommend.
I've bought a X3 and I loved it (with crosspoint). However, the screen broke after just a week, even if I used the official cover all the time. It's a cute gadget but it's too fragile for the intended use: its strength is the form factor, you want to bring it with yourself to read a page in any mobility setting, but its fragility is a critical issue.
I got one, it's pretty cool that it's small enough to just magnet to the back of your phone. If your someone who needs to use a large font on their ereader to read its certainly not for you, but the screen size is good enough for regular sized text.
I would like to see a phone case which this inserts into --- bonus points if there's a way to use it as a status display for the phone for use in bright/direct sunlight.
The obvious innovation is to just make the back of the phone case an eInk display. No need for all the bulk when you can merely have an app on your phone that controls the case-display and the phone can output whatever reader app you want to it like a companion/IoT device.
Or it can be a little bit bulkier and just be a dedicated ereader that is shaped like a phone case. Either way works.
I got the X4 and liked it enough that I used it a ton even though it turned out to be too big to Magsafe onto my phone. In fact, I liked it enough that I also got the X3 on sale so I can use it the way I originally intended to use the X4.
Oh it comes with custom firmware? This is very interesting. I would love to be able to modify some UX and I am sorry, but I need to get the following out of my head. All the e-readers I have had have made it impossible to turn off features like:
1. Selection highlighting... I never use highlighting when reading fiction, but whenever I am not careful enough when turning a page, it'll go crazy with highlighting. Flashing screen, need to close the popup that has added the highlight, removing the highlight again etc.
2. Most of the time I don't want to click on a word to find out its meaning. It's sometimes useful, but I'd rather have it under menu to temporarily enable it. Same reason as before. My e-readers tend to prefer this often enough rather than taking the "next page" action.
3. Make "previous page" be small and not-under-my-finger. Ideally let me choose its position in a fairly precise way.
4. Easy access to accidental "scroll to page 900". I generally don't want it to happen and to be honest, I struggle to think of anybody who does. It can live in a single tiny faraway menu that is impossible to accidentally tap.
5. Swipe-left for previous page. It almost never happens when I want it to happen, so I'd rather turn it off.
In fact, I would love my e-book reader to have no gestures at all. Pretty please let me turn them off! All I want is a tiny button top-right or top-left corner for "open menu", a "previous page" in the other corner and otherwise "tap anywhere" is "next page".
Personal request to any e-book reader software engineers. Please save the position in the book to persistent storage on each page change or every few. At least if the e-reader has any chance of crashing at all, which has been the case with all the ones I have ever had. Yes, not all of them save it...
That's not to say that all the above things are universally bad UX. I think many of these are very useful, if reading non-fiction or having a different goal when reading such as learning a new language. It's just that they are less than brilliant if the goal is to read a book for entertainment in the most comfortable way possible with the fewest things going wrong by accidental taps.
The X4 doesn't have a touch screen, so you're safe on those points. The next iteration will do though, although I think you will be able to turn it off in the reader view.
For those who can afford it, I can recommend the Boox Note for the ebook reader. It comes with full Android, so you are not limited to books but can read news, Hacker News, and other doomscrolling that fills the Internet.
In a pinch, you can also connect it to a Bluetooth keyboard and use it as a development terminal. SSH terminal looks gorgeous on e-ink.
> It comes with full Android, so you are not limited to books but can read news, Hacker News, and other doomscrolling that fills the Internet.
That sounds like an anti-feature. When I first bought an ereader over 15 years ago, I intentionally chose one that didn't support Wifi for this very reason. I want it primarily for reading documents.
But then again, I guess Boox is meant more to be a tablet than an ereader.
Also, genuinely curious - does having Android reduce the time between recharges? As an example, I read a whole book over 7 days, and didn't need to charge my Kobo (and modern Kobo battery life is not great).
I want Kobo to release an 8" color, but don't know if they ever will. I was considering Boox as an alternative, but I worry about battery life and Android. I wonder if my worry is misplaced.
I have a boox device (go Color 7 gen 2) and the battery life is not good for an ereader. For a tablet, it's fine I guess but I actually get more battery life from my actual tablet than this little ereader.
it lasts a day if youre reading all day, a couple days with lighter use. I couldn't finish a whole book on a single charge even if its a small book. Not at my reading speed anyway.
As a comparison, I've already read 3 books on the xteink x4 and still have 60% of battery left. So yeah, android is good but these things need much better batteries to compete.
Boox devices vary on battery life. The thin ones usually have ~12h of reading time per charge and don't lose as much charge while sleeping as android phones do, but a bit more than a kobo. The batteries size is optimized to be just big enough that charging is not particularly burdensome in practice. My only complaint is the flat bezels which are no good for fragile eink screens.
A problem with Boox that some here care about is their non-compliance with the GPL. Their devices run modified GPL software and they have (AFAIK) refused to release their modifications.
If you are looking for a more affordable option, I have a Musnap Ocean C. It's a little bare bones, but still pretty good. It's a color e-ink display and you can get an optional pen that lets you take notes. I only use it for books and documents, though. It's the best option under $300 that I have found if you want something that is color and can take hand written notes.
the point of having an e-ink reader (at least for me and anybody I know who actively use such device), is to read things, so keeping doomscrolling options is *not* an advantage..
Android is nice because it expands the reading options somewhat with the existing app ecosystem. A browser with reader-friendly features like einkBro is something that other devices don't have, but is available easily with no cross-compiling or other tedious activities on android. Reading articles and blog posts page-by-page without the visual interrupt of scrolling is a much better experience for me. Doing everything on-device saves me from having to run various daemons and webservers and browser plugins and constantly switch between machines to keep things in sync.
I've been eyeing the Xteink devices for a while now. They fit all the boxes - small, cheap, physical buttons - a basic reading utility. However, since there's no support for DRM, I'm worried either I won't be able to find books I want to read (what if I want the latest from my favourite author?), or I'll eventually run out.
Might be a tiny tinsy bit of purchase-anxiety as well - it'll be my first e-ink device after all, but what do I know...
I love the X3, light enough I can carry it around without noticing it. Battery lasts forever. I don't feel the need for a backlight at all, I love how simple this is.
I know people favor the X4 for the usb-c, and I'm all for universal charging cables. But in my experience the usb port is often the first component to fail in something like this. And that seems super annoying to replace. The pogo pins on the other hand are unlikely to fail. And the cable is not proprietary, you can get compatible cables on Amazon/etc.
I've had the X3 for a month and I love it. It's so small I forget it's in my pocket and have almost washed it a couple times. I'm working on custom firmware for it, so I ordered an X4 when they had the 20% off sale to test on there too.
I'm a noob so I haven't got very far yet. Currently working on a bootloader then going to do flashcards and a very basic word processor. I'd like to be able to switch firmwares almost like switching applications. I'll share everything on GitHub once I'm sure it won't brick people's devices, but right now the code is just sitting on my PC.
Does anyone know where you can buy an HDMI-compatible e-ink display, which is about the size of an A5 notebook? The idea is that you could have a screen, keyboard, and a small computer zippered up in a case, and could write/code outside in the sun.
Go for the X4. Neither supports USB file transfer, so having USB-C charging is convenient without additional things to worry about. Bigger screen is also better if you're a fast reader. The faster you read, the more your reading speed is limited by the page turn speed.
I skimmed over the project a bit. It seems quite ambitious to aim to reimplement epub, considering that means supporting HTML, CSS, SVG and JavaScript.
Is there a ebook format that isn't just build arround the concept of a webbrowser?
While I agree in terms of modern browser expectations (and books absolutely should not need JavaScript), I think books in HTML makes a lot of sense. HTML was meant for sharing text documents, after all.
I have one of these and they're great. If you get one though, you really do need to convert to XTC for not terribly jagged glyphs -- https://x4converter.rho.sh/
i bought a pocketbook era lite recently, and it's a bit too locked down for my tastes - though usable. i kinda just want a dumb appliance. actually, i want a linux appliance. this probably sounds very "not productized" to a PM, but 99% of what's on there i don't want: a book store, games, etc.
i wish there was just an SDK for building apps (i'll vibe code towards a great epub experience, i'm fine with that). and, i'm fine plugging it in via USB or even SCPing files over wifi. but, it sends my reading progress to a server every time i use it which is highly annoying and concerning. however, the form factor is sufficient.
i guess i was hoping it'd be more aligned with steam's direction with their steam machine.
Hijacking … i have some random e-ink displays (from a bought product)… there seem to be 6 lines to the mcu (or 7, havent measured). Any 2026 tips on approaches to reverse engineer this to run on an arbitrary hobby mcu like esp32? Oh the mcu seems to be a WinnerMicro W100 Series MCU (arm m3)
As someone who has resisted buying an e-reader for years because I "prefer physical books", I finally purchased a Kobo Clara BW and love it. Even though I usually only read one book at a time, having my whole library in a small form factor is really wonderful.
I’ve been looking at these for a while, hoping the custom firmwares for it will become more popular, as I was considering getting this for my six-year-old.
The disabled usb is certainly a bummer. I wonder how they disabled it though – is there a hardware difference?
I love this thing and I use it a lot more than my kindle and my kobo (with koreader). I really like the form factor and the fact that goes out of sleep almost instantly and goes to sleep equally as fast. It seeps battery. It is perfect the way it is.
Have the X4, the size is perfect - I always have it in my pocket and can read a view pages whenever I am waiting for something. Reduced my phone usage / doom scrolling nonsense with it. Best 50€ spent in a long time.
I do wish I'd gotten the X4 not the X3. I was very scared off by the magnetic charger (which is apparently quasi standard?). I kind of want to muck with using the gyrometer (only on the x4) as an input device though. Allegedly the magnetic charger is somewhat common/interoperable, which de-risks the situation a lot.
I would love if a device like this, combined with the zines of old would produce some really creative and interesting shortform content to get folks off smartphones.
I'm trying to think in terms of small wins more and 1 minute spent creating something dumb or doing something not on a phone is 1 less minute creepy, greedy tech bros can extract your data for profit.
Got the X4. Put CrossPoint on it. Works like a charm. The http server accessible over wifi makes transferring books extremely simple. (Shame on the Kindle for locking everything down.) This is proof-of-concept that a microcontroller is more than enough for something like an e-reader.
I have a Kindle and a Kobo. They are sturdy devices. But the X4 is the one that is a genuine e-reader. Would not get it as my one and only e-reader though as you tend to miss the size and backlight of the larger ones.
What would I want from future iterations?
- backlight even if it compromises on battery a bit
- a bit more DPI
Everything else is good enough.
I love my X4 as well, and would love a backlight. Crosspoint and its downline forks are great.
the only funny thing about the X4 is reading it in bright sunlight. it will corrupt the image on the screen on page turn unless you shade it? something to do w/ older eInk screens and not having a UV Filter. weird, slightly annoying.
Its increased my reading 2-3x though!
I'm with you on every bit. I love my Kobo Libra 2 and it lives on my nightstand table. It's an excellent reader. The X4 with CrossPoint is an alright reader, but I've been chewing through books on my morning commute because it fits in my jacket pocket and I can have it out on the train without bumping into other people.
It's not the best reader I own, but it's the best reader I have on me at any given moment when I'm not laying in bed.
> It's not the best reader I own, but it's the best reader I have on me at any given moment
This. The form factor is almost the right one for an e-reader. The battery lasts for weeks. It is so open that you could probably write your own firmware for it based on CrossPoint or similar for your own needs.
Needs some iterative development while ruthlessly culling requests for random features.
3 replies →
Does your reading position sync up between the two devices?
3 replies →
Do you know what the maximum SD card size that it'll support? I'm especially interested if a 1TB card will work.
How many books do you want to fit on that thing? :o
1 reply →
There are rumors they will release a V2 Pro version with touch and backlight in the second half of this year.
They also have already announced the S4 that is basically the same device, a bit ticker with touch and backlight and running android.
It has perfectly usable buttons. Adding touch feels like straying from the core proposition to have a minimal reader.
3 replies →
It was probably a decade ago, but I used to have this extremely cheap e-reader that ran off AA batteries, used a monochrome LCD screen (no lighting) and was based on a microcontroller. If you let the batteries die and waited too long to replace them, you had to reflash the software on it. I think it only handled mobi format, but it might have been epub.
Not being lighted is what has kept me from trying it. If they do add lighting I hope it is a front light and not a back light. Hard to beat a front lit e-ink display for reading. Bonus points for warmth settings.
Its not physically possible to have eink (based on inked beads, like the current e-reader has) and backlight.
only frontlight is possible.
All of this. It's a solid device. I like it. It won't replace my Kobo, but it has it's place in my tech lineup.
Will buy the next one if it has a light.
I have the X4 and the X3 (newer smaller one). I will get whatever the next version is if it has a backlight or more DPI / support for smaller font.
X4 is great - has usb-c charger and with the cover feels like an easy to pocket and bring everywhere reader. Does not fit on the back of an iphone. I assume the magnet layout works with popular android phones though.
X3 is also great, actually fits on the back of the phone with the magsafe - magnet is a _bit_ too weak. It does fall off in my pocket frequently but I haven't lost it yet. Does not have usb-c - has weird little magnetic 4 pin charger.
I will gift my X4 to my brother once I've loaded some more content to it.
I recommend this for anyone that wants to save web novels for offline reading https://github.com/lncrawl/lightnovel-crawler - Calibre will sync the epubs to the x4 and x3.
Use the crosspoint OS https://github.com/crosspoint-reader/crosspoint-reader
All that said... I do still use my kindle as default. More content accessible more easily, better syncing, backlight
the next version will unfortunately be a generic Android reader. This device is good because, by chance, out of a thousand devices, one of them has to be better than all the rest. This product is not good by design or merit, but by chance. Same goes for lots of popular cheap Chinese tech, like the Miyoo Mini+ for example. Better than it has any right to be, and the people making it don't have a clue; every change to such a device can only be for the worse.
I've looked at this device and I wonder how good the layout engine is. Screenshots never show text with any hyphenation going on which makes me wonder if it even supports hyphenation.
One of the images on the Amazon page for the reader has somebody holding one beside their laptop and if you look at the screen, it looks terrible. There are even words jammed together ("would be most suitable forthe job").
I love that it has physical buttons though. My reader is the Kindle Oasis and the buttons are one of my favorite features of the device. The Oasis layout engine and typography are both pretty good and I wonder if the X4 would end up feeling like a big downgrade.
The alternative firmwares give you a lot more options in this, stock is OK in layout
The layout engine is limited. It does flow text quite well, but when I had mine (the screen broke a few months ago) I was working on adding more features to the rendering engine.
It's easy to write a HTML & CSS layout engine to support most of the epub spec, but hard to do it well on such a constrained chip. Even things like nested lists and inline code snippets are a challenge.
Flash Crosspoint. I reflows much better than stock. It also fixes the lack of space between paragraphs.
1 reply →
That must be why Amazon does a lot of pre-processing on their server. They know what device they are sending to and can tailor the file for that device.
Maybe expecting the X4 to look great is asking too much. It took Amazon years to get it right on Kindle. Hyphenation is a difficult task.
Custom firmwares support hyphenation
I got one last April, and love it: https://taoofmac.com/space/reviews/2026/04/04/1800
I also built two quick hacks for it that people might like:
- https://github.com/rcarmo/bun-readlater-epub
- https://github.com/rcarmo/bun-opds-server
I love my X3. I glued its magnetic folio to the back of my Apple Wallet. It turned out perfectly, for me. Pictures below. I've read The Odyssey and several other shorter books on it and have yet to recharge it.
- https://pbs.twimg.com/media/HFaPCStWYAAOj6f?format=jpg&name=...
- https://pbs.twimg.com/media/HFaPCO8WIAASMEn?format=jpg&name=...
- https://pbs.twimg.com/media/HFaPCPEXgAE3O4z?format=jpg&name=...
I got the X4 Reader recently as well. I really worried that it was going to be a gadget I used for a while then just toss into a drawer but it really has been a useful device. I liken it to the phrase "The best camera is the one that's with you.", having this attached to my phone, so I near always have it with me, just means when I have a tiny bit of downtime say waiting for the bus, or waiting for a food order, I just pull it out, read a few pages then carry on my day.
Only challenges I have are, I wish the MagSafe was a little stronger, it does come off when I put my phone in my pocket which, 9 times out of 10, means I just have 2 separate devices in my pocket.
I got the X4 a few weeks back and installed https://github.com/uxjulia/CrossInk and it has been a dream.
I've been using it for about 6 months. Very, very good - especially paired with anna's archive.
IT IS VERY FRAGILE! The eink screen on my first broke while in my backpack. The company is generous, I bought a new one and they gave 35% off and included all accessories (reading light, case, extra protectors). Highly recommend.
I've bought a X3 and I loved it (with crosspoint). However, the screen broke after just a week, even if I used the official cover all the time. It's a cute gadget but it's too fragile for the intended use: its strength is the form factor, you want to bring it with yourself to read a page in any mobility setting, but its fragility is a critical issue.
I got one, it's pretty cool that it's small enough to just magnet to the back of your phone. If your someone who needs to use a large font on their ereader to read its certainly not for you, but the screen size is good enough for regular sized text.
It's also cool that it's chip is just an ESP32.
I would like to see a phone case which this inserts into --- bonus points if there's a way to use it as a status display for the phone for use in bright/direct sunlight.
The obvious innovation is to just make the back of the phone case an eInk display. No need for all the bulk when you can merely have an app on your phone that controls the case-display and the phone can output whatever reader app you want to it like a companion/IoT device.
Or it can be a little bit bulkier and just be a dedicated ereader that is shaped like a phone case. Either way works.
1 reply →
I got the X4 and liked it enough that I used it a ton even though it turned out to be too big to Magsafe onto my phone. In fact, I liked it enough that I also got the X3 on sale so I can use it the way I originally intended to use the X4.
Put two in a printed case, crosslink to make page turn work and it's a book reading experience.
Oh it comes with custom firmware? This is very interesting. I would love to be able to modify some UX and I am sorry, but I need to get the following out of my head. All the e-readers I have had have made it impossible to turn off features like:
In fact, I would love my e-book reader to have no gestures at all. Pretty please let me turn them off! All I want is a tiny button top-right or top-left corner for "open menu", a "previous page" in the other corner and otherwise "tap anywhere" is "next page".
Personal request to any e-book reader software engineers. Please save the position in the book to persistent storage on each page change or every few. At least if the e-reader has any chance of crashing at all, which has been the case with all the ones I have ever had. Yes, not all of them save it...
That's not to say that all the above things are universally bad UX. I think many of these are very useful, if reading non-fiction or having a different goal when reading such as learning a new language. It's just that they are less than brilliant if the goal is to read a book for entertainment in the most comfortable way possible with the fewest things going wrong by accidental taps.
The X4 doesn't have a touch screen, so you're safe on those points. The next iteration will do though, although I think you will be able to turn it off in the reader view.
For those who can afford it, I can recommend the Boox Note for the ebook reader. It comes with full Android, so you are not limited to books but can read news, Hacker News, and other doomscrolling that fills the Internet.
In a pinch, you can also connect it to a Bluetooth keyboard and use it as a development terminal. SSH terminal looks gorgeous on e-ink.
> It comes with full Android, so you are not limited to books but can read news, Hacker News, and other doomscrolling that fills the Internet.
That sounds like an anti-feature. When I first bought an ereader over 15 years ago, I intentionally chose one that didn't support Wifi for this very reason. I want it primarily for reading documents.
But then again, I guess Boox is meant more to be a tablet than an ereader.
Also, genuinely curious - does having Android reduce the time between recharges? As an example, I read a whole book over 7 days, and didn't need to charge my Kobo (and modern Kobo battery life is not great).
I want Kobo to release an 8" color, but don't know if they ever will. I was considering Boox as an alternative, but I worry about battery life and Android. I wonder if my worry is misplaced.
I have a boox device (go Color 7 gen 2) and the battery life is not good for an ereader. For a tablet, it's fine I guess but I actually get more battery life from my actual tablet than this little ereader.
it lasts a day if youre reading all day, a couple days with lighter use. I couldn't finish a whole book on a single charge even if its a small book. Not at my reading speed anyway.
As a comparison, I've already read 3 books on the xteink x4 and still have 60% of battery left. So yeah, android is good but these things need much better batteries to compete.
Boox devices vary on battery life. The thin ones usually have ~12h of reading time per charge and don't lose as much charge while sleeping as android phones do, but a bit more than a kobo. The batteries size is optimized to be just big enough that charging is not particularly burdensome in practice. My only complaint is the flat bezels which are no good for fragile eink screens.
Sounds like the opposite of what I want for my ebook reader.
A problem with Boox that some here care about is their non-compliance with the GPL. Their devices run modified GPL software and they have (AFAIK) refused to release their modifications.
If you are looking for a more affordable option, I have a Musnap Ocean C. It's a little bare bones, but still pretty good. It's a color e-ink display and you can get an optional pen that lets you take notes. I only use it for books and documents, though. It's the best option under $300 that I have found if you want something that is color and can take hand written notes.
the point of having an e-ink reader (at least for me and anybody I know who actively use such device), is to read things, so keeping doomscrolling options is *not* an advantage..
Android is nice because it expands the reading options somewhat with the existing app ecosystem. A browser with reader-friendly features like einkBro is something that other devices don't have, but is available easily with no cross-compiling or other tedious activities on android. Reading articles and blog posts page-by-page without the visual interrupt of scrolling is a much better experience for me. Doing everything on-device saves me from having to run various daemons and webservers and browser plugins and constantly switch between machines to keep things in sync.
I've been eyeing the Xteink devices for a while now. They fit all the boxes - small, cheap, physical buttons - a basic reading utility. However, since there's no support for DRM, I'm worried either I won't be able to find books I want to read (what if I want the latest from my favourite author?), or I'll eventually run out.
Might be a tiny tinsy bit of purchase-anxiety as well - it'll be my first e-ink device after all, but what do I know...
Liberate your e-books, my friend: https://github.com/Satsuoni/DeDRM_tools/discussions
You can get free ebooks from the same place Meta got them.
The no USB flashing doesn't appear to be the case if you get it straight from OEM. It is a bit pricier than amazon.
https://www.xteink.com/products/xteink-x4
Love my X4. Shameless plug, I also built an iOS/Android app to manage books and also send web articles over to Crosspoint
https://crosspointsync.com/
Thank you. I'm not the biggest fan of the Crosspoint web interface, so I'll definitely give this a try.
I love the X3, light enough I can carry it around without noticing it. Battery lasts forever. I don't feel the need for a backlight at all, I love how simple this is.
I know people favor the X4 for the usb-c, and I'm all for universal charging cables. But in my experience the usb port is often the first component to fail in something like this. And that seems super annoying to replace. The pogo pins on the other hand are unlikely to fail. And the cable is not proprietary, you can get compatible cables on Amazon/etc.
I've had the X3 for a month and I love it. It's so small I forget it's in my pocket and have almost washed it a couple times. I'm working on custom firmware for it, so I ordered an X4 when they had the 20% off sale to test on there too.
As a crazy person with both, I have mixed feelings between them.
In favor of the X3:
- Crisper text
- Whiter display
- Slightly better battery life
- Top-mounted power button (subjective)
In favor of the X4:
- Larger display
- Plain USB-C charging
- Slightly better custom firmware support
- Backward and forward button on the same side (subjective)
link the custom firmware!
I'm a noob so I haven't got very far yet. Currently working on a bootloader then going to do flashcards and a very basic word processor. I'd like to be able to switch firmwares almost like switching applications. I'll share everything on GitHub once I'm sure it won't brick people's devices, but right now the code is just sitting on my PC.
Does anyone know where you can buy an HDMI-compatible e-ink display, which is about the size of an A5 notebook? The idea is that you could have a screen, keyboard, and a small computer zippered up in a case, and could write/code outside in the sun.
I've been eyeing the Xteink Reader but cannot decide between the X4 (4.7" diag) and X3 (3.7" diag).
FWIW, the X3 requires a pogo pin cable, while the X4 requires a standard USB-C.
Anybody got any recommendations?
Thanks!
Go for the X4. Neither supports USB file transfer, so having USB-C charging is convenient without additional things to worry about. Bigger screen is also better if you're a fast reader. The faster you read, the more your reading speed is limited by the page turn speed.
Thanks, all for the reco.
Looking fwd to my reader soon!
I picked the X4 over X3 because the usb-c is convenient for charging (which you barely need to do)
I love it and use it every day.
precisely, also, if you don't need to charge the device for weeks, months even, you're probably gonna lose the specialised cable.
a usbc is so easy to come by, you're never going to have to wait for amazon to deliver the cable you need to charge this one device you own.
The X4. I always have a USB-C cable handy; so, i can charge it in the bedroom, at y desk, etc.
CrossPoint 1.4.0 came out 2 hours ago:
https://github.com/crosspoint-reader/crosspoint-reader/relea...
I skimmed over the project a bit. It seems quite ambitious to aim to reimplement epub, considering that means supporting HTML, CSS, SVG and JavaScript.
Is there a ebook format that isn't just build arround the concept of a webbrowser?
While I agree in terms of modern browser expectations (and books absolutely should not need JavaScript), I think books in HTML makes a lot of sense. HTML was meant for sharing text documents, after all.
epub is overkill for a vast majority of books.
A format that only supported
- headings
- paragraphs
- emphasis (bold/italics)
- bullets
- inline images
is good enough. A simple container with a TOC pointing to text blocks/files within it that can be processed very cheaply.
Unfortunately, with something like epub, you lose all the simplicity because you want to support every single feature even if rarely used.
HTML and CSS is enough for 99% percent of epubs, and that's the only subset of epub standards that Crosspoint tries to support
1 reply →
I have one of these and they're great. If you get one though, you really do need to convert to XTC for not terribly jagged glyphs -- https://x4converter.rho.sh/
I have a mudita kompact as my primary phone, is there any value in getting an additional device like this?
i bought a pocketbook era lite recently, and it's a bit too locked down for my tastes - though usable. i kinda just want a dumb appliance. actually, i want a linux appliance. this probably sounds very "not productized" to a PM, but 99% of what's on there i don't want: a book store, games, etc.
i wish there was just an SDK for building apps (i'll vibe code towards a great epub experience, i'm fine with that). and, i'm fine plugging it in via USB or even SCPing files over wifi. but, it sends my reading progress to a server every time i use it which is highly annoying and concerning. however, the form factor is sufficient.
i guess i was hoping it'd be more aligned with steam's direction with their steam machine.
> i wish there was just an SDK for building apps (i'll vibe code towards a great epub experience, i'm fine with that)
That seems to be what crosspoint-reader is: https://github.com/crosspoint-reader/crosspoint-reader
Hijacking … i have some random e-ink displays (from a bought product)… there seem to be 6 lines to the mcu (or 7, havent measured). Any 2026 tips on approaches to reverse engineer this to run on an arbitrary hobby mcu like esp32? Oh the mcu seems to be a WinnerMicro W100 Series MCU (arm m3)
there are 4 or 5 command sets, you can safely try them all. for that few wires, it'll be spi
As someone who has resisted buying an e-reader for years because I "prefer physical books", I finally purchased a Kobo Clara BW and love it. Even though I usually only read one book at a time, having my whole library in a small form factor is really wonderful.
I’ve been looking at these for a while, hoping the custom firmwares for it will become more popular, as I was considering getting this for my six-year-old.
The disabled usb is certainly a bummer. I wonder how they disabled it though – is there a hardware difference?
Crosspoint is very popular and very easy to flash onto the device.
Locking and preventing flashing of firmware only happened in China.
This page mentions international models, but seems it's still possible to flash them in any case
https://crosspointreader.com/#unlock-tool
also: https://crosspointreader.com/unlocker
I love this thing and I use it a lot more than my kindle and my kobo (with koreader). I really like the form factor and the fact that goes out of sleep almost instantly and goes to sleep equally as fast. It seeps battery. It is perfect the way it is.
Have the X4, the size is perfect - I always have it in my pocket and can read a view pages whenever I am waiting for something. Reduced my phone usage / doom scrolling nonsense with it. Best 50€ spent in a long time.
I love my X4. I throw it in my backpack or pocket when I take the dog to the park and read a few pages when we sit in the shade.
been using on the back of my phone for a few months, my most satisfying hardware purchase in a long time
what phone does it fit on? I have the X3 coming today for this very reason. The x4 is just too big and the magnets misplaced to fit on any phone I own
iPhone pro max, fits nicely even with a cover, i also have a x3 but slightly prefer the bigger screen of x4’s but portability on is the read deal
Just seeing it act as a trigger to read for me, especially when book cover as standby background
I do wish I'd gotten the X4 not the X3. I was very scared off by the magnetic charger (which is apparently quasi standard?). I kind of want to muck with using the gyrometer (only on the x4) as an input device though. Allegedly the magnetic charger is somewhat common/interoperable, which de-risks the situation a lot.
I have an X4, though its not small enough to stick onto a phone (or my phone is not gigantic enough), I do love it, simplistic and purposeful
I would love if a device like this, combined with the zines of old would produce some really creative and interesting shortform content to get folks off smartphones.
I'm trying to think in terms of small wins more and 1 minute spent creating something dumb or doing something not on a phone is 1 less minute creepy, greedy tech bros can extract your data for profit.
[dead]