Comment by tverbeure
9 hours ago
Not sure if you saw it, but before doing the TDS7104, I refurbished two Agilent 54831 scopes: https://tomverbeure.github.io/2026/03/28/Repair-of-Two-Agile.... For the one that still had a HD, copying the image from to an SSD worked without any issues. However, I also had a 54825A where it didn't work (I sold it, no blog post about that one.) So it's clearly hit-and-miss.
I found the 32 screws of the TDS7104 less of a pain than the dismantling the Agilents which had less screws.
> I found the 32 screws of the TDS7104 less of a pain than the dismantling the Agilents which had less screws.
Yeah sliding the whole thing out of the shell and the (curses) front panel ribbon that gets in the way, and the best part is that if it pops out on the front panel end, the tab is held in place by a metal prong that you have to bend (break away) to undo the tab to secure the ribbon. The prong is not screwed down, it's riveted. Breaking that thing away was the best thing I could do without ruining the panel. I ended up also gluing that ribbon to the chassis so that it doesn't get caught again.
Edit: I also bought mine to use it, hence all the extra bits around it.
My 54825A had a power-up problem: if you unplugged the AC cord for a few hours, pressing the front-panel button wouldn't power on the scope. But if you plugged in the AC for about 5 minutes, it would work fine again.
That sounds like an easy thing to fix, but the whole power-on architecture was a baffling Rube Goldberg device from the button on a small support PCB to the front panel PCB to the PC plug-in card to the power supply. I've never seen anything like it.
I disclosed the flaw to the buyer (the price was very low) and he was excited to have something to work on. :-)
There are exceptions to the "Winscopes" from the same era in the 1 GHz+ space (RTOS like VxWorks but with Ethernet and modern goodies) that are not HP/Tek/R&S, but I'm not listing them because I'm out on an active hunt for one ;-)
2 replies →