Comment by pixl97
1 month ago
Depends if it's luxury or commercial. Commercial products are generally able to be fixed, but there is a quite a price premium on them.
1 month ago
Depends if it's luxury or commercial. Commercial products are generally able to be fixed, but there is a quite a price premium on them.
Commercial and consumer dishwashers are only the same in that they're both called "dishwashers" and use water. The former expect little to no food, have cycles measured in minutes, and run at temperatures that would eat more sensitive dishes alive.
You were close.
A commercial dishwasher will cut right through amounts of food that a normal residential dishwasher wouldn't touch (pre-wash is more for efficiency and to keep crap from piling up in the bottom tray of the dishwasher) and it will actually be ever so slightly less harsh on whatever goes in it (plastics are the problem mostly) because while it washes and rinses way hotter it doesn't have a stupid heating element that runs to dry things.
It will also use fucktons more water and more power and make more noise.
Haven't worked in a commercial kitchen, and I've been wrong before (in this chain, no less), but how would the water be hotter without a heating element? Consumer dishwashers are plumbed into the hot water, so it can't be a difference in a direct hook-up. Without it's own heating element, I wouldn't assume it has its own built-in and ready-on-demand hot water tank, either.
My last guess is more frequent cycles, meaning hotter water already at the spigot / dishwasher outlet, similar to the consumer recommendation to run the hot water for a minute prior to starting the dishwasher?
Plastics / tupperware were actually what I had in mind lol
4 replies →
Commercial products usually require knowledge (expertise?), and have their own limitations. Even repairability can be an issue in a different way.
I don't know for dishwashers, commercial printers are expected to be serviced by the maker or affiliated business and getting parts as a mere peasant can be pretty complex. Surely rich people can just throw money at a contractor, but that's not what we're talking about I think (otherwise having a new one delivered everytime would also just work)
I mean, repairing anything requires knowledge. The problem with most home devices is they are not repairable at all and you can't get parts.
While I'm a computer farmer for my day job, I can repair a vast amount of different devices as long as they don't take specialised equipment like vacuum pumps. And while I don't consider myself a rich person, between my wife and I we're in the higher income brackets in the US, I still service as much of my own stuff as possible. And in general commercial stuff is in the same price ranges as the higher end consumer stuff.
The good/bad part of modern consumer appliances is that they are largely giant computers with fewer mechanical parts to fail. They can be more reliable but when something breaks, it almost always requires replacing a main board that costs 25-50% of the replacement cost of the entire unit.
I've had two boards die on appliances this year. Fortunately, warranty coverage paid for the parts. So now I have a practically new refrigerator and furnace. At least until they fail again in 3-5 years.