Comment by brucehoult

It's not all that slow as a concept at that time when RAM speeds were as fast as CPU speeds. I think it's just that TI's implementation of the concept in that particular cost-optimised home computer was pretty bad -- the actual registers were in 256 bytes of fast static RAM, but the rest of the system memory (both ROM and RAM) was accessed very inefficiently, not only 1 bytes at a time on a 16 bit machine, but also with something like 4 wait states for every byte.

The 6502 is not very different with a very small number of registers and Zero Page being used for most of what a modern machine would use registers for. For example (unlike the Z80) there is no register-to-register add or subtract or compare -- you can only add/sub/cmp/and/or/xor a memory location to the accumulator. Also, pointers can only be done using a pair of adjacent Zero Page locations.

As long as you were using data in those in-RAM registers the TI-99/4 was around four times faster than a 1 MHz 6502 for 16 bit arithmetic -- and with a single 2-byte instruction doing what needed 7 instructions and 13 bytes of code on 6502 -- and it was also twice as fast on 8 bit arithmetic.

It was just the cheap-ass main memory (and I/O) implementation that crippled it.