Comment by leoedin
15 hours ago
A really neat concept. It uses a special hinge design, a magnetic encoder and torque modulation to control the lift of the rotor as it spins. Completely negates the need for a conventional helicopter's swash plate.
The single motor does have the pretty major downside that it spins the moment it's in the air. I suspect a 2 motor drone with a tail motor would be a lot more practical. But I really like how mechanically simple the rotor hinge design is - it pushes all the complexity into the control algorithm.
Note that the concept itself has been done before in RC helicopters. The only difference here is using a one-propeller drone.
https://hackaday.com/2020/06/25/building-and-flying-a-helico...
https://www.youtube.com/watch?v=d80oXSCcHTk
Yep, he mentions the video you linked as well. (Mentioning because I watched the video you linked first.)
Perhaps there are specific applications where the payload spinning could be an advantage, imaging/scanning perhaps (which in the video is going to be in the next iteration for the builder).
I don't think it would be all that useful, give the very way it works (modulating motor speed) - your rotation would not be consistent in speed during even a single turn, which makes exposure times different each frame, and possibly too low.
A student and I once made a ground robot that had a single IR laser range measurement. The robot span as it drove, and we used the single range with an IMU to do early realtime SLAM to assemble the 1D ranges into a 2D view of the room. This flying drone would naturally make a 3D scan due to wobble around the vertical axis. Maybe not super useful, but potentially a fun curiosity to use such a minimal device and turn the unwanted motions into something helpful.